The exam is offered in some areas outside of the US, you can see them at this link:

http://ncees.org/audience-landing-pages/international/

Before getting too much in to the details, you should do two things to ensure your eligibility for taking the FE exam.

The first is to do an ABET accredited program search. If your program is accredited, then applying for the exam should be fairly streamline, if not, then you will need to do one more step prior to applying. You can do a search here:

http://main.abet.org/aps/Accreditedprogramsearch.aspx

If your program isn’t accredited, that won’t be a problem, it’s only another step that must be complete.

The step is, visit this page on the NCEES site:

http://ncees.org/credentials-evaluations/

Here you will find a lot of good information for individuals who were educated outside of the United States. You will find that you need to do a credential evaluation, which this page will give you information on.…

The last post I covered 2 of the 5 keys to DOMINATING the Engineer in Training Exam now, here is a recap:

1. CONSOLIDATE YOUR RESOURCES

Get your hands on a solid, high quality Engineer in Training review book!

2. CONNECT YOUR MIND TO YOUR PHYSICAL UNDERTAKING

Ask yourself what your goal is. I know this is probably an obvious answer, “I want to pass the Engineer in Training exam!”. Take it a step further than that, you will really set yourself in the right mindset to dominate the EIT exam.

3. THE POWER OF YOUR CALENDER

It’s typical for us Engineers to look for a fast forward button, to want to jump past all the “fluff” and get on to meat of the business. With every successful project in your life, there was a successful schedule attached to it. Preparing for the Engineer in Training exam is no different, scheduling how you are going to get from being un-certified to a certified EIT is worth your time. When you sit back and brainstorm/schedule how to get from point A to point B, you will set yourself up with a greater probability for success. By scheduling, you have the opportunity to expose possible obstacles, processes, and other restraints that are ineffective in getting the job down. You are able to effectively weed out the “fluff” that will really bog up the end result.

4. DEVELOP SUCCESS THROUGH SELF INFLICTED PAIN

Prior to you even starting your studies, get your hands on the best practice exams out there. I know the thought of sitting down for and giving yourself an exam is just ludicrous, but trust me, it pays off. When you take your first practice exam, you will probably realize just how much work you have ahead of you. More …

I would just like to thank you personally for visiting EngineerInTrainingExam.com and giving me the opportunity to provide you with the best information related to the Engineer in Training exam. You can always count on me to help you out whenever you’re in need, so if you ever have any questions, or would just like to drop an email to say hi, please feel free to email me at justin@engineerintrainingexam.com and I’ll do my best to get back to you ASAP.

If you would like more information about the EIT exam, please feel free to use any of my FREE resources at EngineerInTrainingExam.com.

To ensure you receive future subscribers-only emails, please add justin@engineerintrainingexam.com to your e-mail address book or safe senders list.

Thank you, and I wish you all the luck in preparing to dominate the EIT exam!

Without Further ado…

THE 5 KEYS TO DOMINATING NOW: Setting yourself up to DOMINATE the Engineer in Training exam from the start

When I look back to when I was preparing for the Engineer in Training exam, I see that my success was just as much from how I structured my studies as it was the time I actually spent studying.  How you set up your studies is a characteristic that will rear its head from the beginning through the end.  We want to make sure that this is a positive enhancement, not a hindrance, to our studies.

To amplify the success rate of your studies, you need to focus upfront on the cylinders of your engine; focus on the minute details so they don’t seep out later only to annihilate your momentum.

Here are the first two of the five tips that will ensure you are at the top of your game from the start.

1.  CONSOLIDATE YOUR RESOURCES

Get …

Rounding the corner in to the final night prior to the Engineer in Training exam is a crucial time that could either make or break you depending on how you approach it. If you choose to use the time as cram session, you run the risk of not only being mentally worn out for the exam, but you instill a feeling of desperation that will lead to panic and test anxiety. These feelings are counterproductive to taking a good exam.

Instead, concentrate the night before on disengaging and rejuvenating your mind for the journey to come. If you feel the urge and have well organized notes, you can run through them prior to bed, strictly reinforcing, but not trying to memorize. The goal is to not study the night before, focus on relaxing, your performance will be much improved versus the alternative.

Check out the study guide for more helpful recommendations from my experience with the Engineer in Training exam. …

There are many ways that you can approach this one. In my experience though, the best way to get the most out of your practice exams is to use them at strategic points during your EIT exam preparation. When I was studying for the Engineer in Training exam, I purchased 2 different practice exams. I took the first exam prior to opening my Review manual to the first chapter. I definitely wasn’t prepared and pretty much bombed it, but looking back, know that this was necessary, as it established a baseline for what I needed to focus on.

At the end of my studies, a week before sitting for the exam, I took the same exact exam as I previously did to see what I had learned over the duration of my studies.  This exam went much better, but was still a little sketchy and I struggled mightily on things such as time management and problem comprehension. This is expected though, so to hone in on my test taking skills, I waited a day or two and took the final practice exam, structuring it the most realistically as I could under timed conditions.

Using the practice exams throughout your studies will help focus your efforts on where you are lacking ability and comprehension.  Structuring these exams as closely to what you would expect on test day will really help you polish up on your test management skills as well as give you that extra boost of confidence going in to exam day.

Check out the resource page for my recommendations for practice exams…

I am unsure of this, but if you can, it’s certainly not legal, and I highly recommend against seeking and/or using such material. This is a very serious offense towards the NCEES and further compromises the integrity of the exam. The NCEES Engineer in Training exam is copyright in full and no examinee is allowed to reproduce or disclose any information relating to a specific exam. This includes but is not limited to discussing any exam questions, answers, solutions, or other problems on the Internet, forums, or any other related means.…

As taken from the NCEES website, the passing rates from the April 2010 Engineer in Training exam were as follows:

Other Disciplines module breakdown by examinee degree

…

Unfortunately, you do not receive a refund if you fail the Engineer in Training exam.  If prior to the exam, you know you will be missing it, and have a valid reason for doing so, you can contact your State board and they may grant you a postponement.  Each board is unique in the way they handle these instances, so it’s important you contact your Board immediately upon something coming up.  Visit the State by State requirements page for more information.…

The cost of the Engineer in Training Exam varies from state to state. Some states don’t require you to pay any application fee for the exam, while others could charge up to $200 to sit for the exam. It’s best that you refer to your specific State’s requirements on the dedicate State Requirements page.…

The most commonly used formulas for all the topics covered in the Engineer in Training exam can be found in the NCEES supplied Reference Handbook.  Refer to this link regarding the review of the Reference Manual prior to the exam.  You can download the NCEES Reference Handbook HERE……

Refer to this link regarding the review of the Reference Manual prior to the exam. You can download the NCEES Reference Handbook HERE
……

Absolutely, and it is extremely important that you do so.  In college, we were able to produce a 1 page cheat sheet of common formulas and other related information to use during our exams.  These cheat sheets were produced by us, thus, we were familiar with the format and the areas of needed information while taking the test.  At times it made it easier, but other times it may have made things more difficult because we either jammed too much information on to the sheet, or did not organize it good enough.  The Reference Handbook is no different then these cheat sheets.  It is quite a bit larger, and for that reason, it is a must that it is purchased prior to ensure you are familiar from front to back where the certain information is stashed.

Head over to the NCEES website to get the reference handbook or visit the resources page for the direct link.…

The EIT exam uses both SI (International System) and USCS (US Customary System) units for the problems. It is important to be competent both in recognizing and converting in to and out of each of the unit structures.

You can get to know a little more about the format here

Lost? Head back to the homepage to get more of your questions answered.…

The Engineer in Training (EIT) exam is the first step in acquiring your Professional Engineer (PE) License. Once you pass the Engineer in Training exam and gain the designation of EIT, it is not required to take any further tests to maintain the designation. You may though need to pay a fee to renew the certification every given period of time as defined by your specific State Board of Engineers.

At the time of passing, you enter a period in which you work under the supervision of a Registered Professional Engineer to gain experience. Once this experience is gained, typically 4 years, you will need to apply for and take the Professional Engineer exam, which is also administered by NCEES. When you take and pass the Professional Engineer Exam you become a PE and are no longer referred to as an EIT.

Need to get back to the homepage? Click Here…

Yes, this is the typical way that you announce to people that you are an Engineer in Training or Engineering Intern. As each state regulates the use of certain “engineer” terms until one is registered, you are not allowed to refer to yourself using variations of “engineer” (e.g., registered engineer, licensed engineer, Mechanical Engineer, Professional Engineer…). This means you can not put your “position title” on your business card or email signature as Electrical Engineer, Mechanical Engineer, etc.  However you can use a title such as Electrical Engineer Intern or Mechanical Engineering Department, etc.

It will only be a matter of time though that you can call yourself an Engineer, stay on track, and focused. Feel free to use any of the resources on this site your shoot me an email if you have any additional questions.…

Most all states regulate the use of certain “engineer” terms.  Until one is registered as a Professional, you are not allowed to refer to yourself using variations of “engineer” (e.g., registered engineer, licensed engineer, Mechanical Engineer, Professional Engineer…).  You will most likely reserve the right to title yourself as an Engineering Intern (e.g. Mechanical Engineering Intern) or an Engineer in Training, this varies state to state.  The acronym EIT or EI can typically be used in your signature to announce to people that you are an Engineer in training or Engineering Intern.

Use the resources on this site to learn more about what the Engineer in Training Exam can do for you both personally and professionally.…

First of all, pat yourself on your back for thinking ahead like this. Many people look at the Engineer in Training exam as an test that is near impossible to pass. Going in to the exam and your studies with this positive attitude is definitely setting you up on the right path to conquer the exam without looking back. Once you pass the EIT exam, you will be designated an Engineer in Training (EIT), or Engineering Intern (EI), each term means the same thing. You are commonly allowed to put the initials at the end of your name which is kind of a cool. At this time, you begin to acquire acceptable work experience towards your PE license while working under, in most cases, the supervision of a registered Professional Engineer. The experience required to apply for your PE license is typically a minimum of 4 years but differs from state to state and in some cases dependent on the accreditation of the program you graduated from.

I have an area on this site dedicated to State specific requirements that you can reference for further details.…

The Engineer in Training (EIT) certification is the designation gained by an individual after passing the Engineer in Training exam, also known as the Fundamentals of Engineering (FE) exam, administered by the NCEES twice a year at specified locations throughout each State. Engineer Intern (EI) is also a term synonymous to Engineer in Training (EIT) certification. The Engineer in Training (EIT) exam and certification is the first step in acquiring your Professional Engineer (PE) License.

Get to know more about the test here…

When you become certified as an Engineer in Training (EIT), or Engineering Intern (EI), you have successfully hurdled the first obstacle in acquiring your Professional Engineer (PE) License. Along with being able to put the initials EIT after your name, which is pretty cool, passing the exam shows an unparalleled dedication to your career and education and is seen in a positive light by potential employers. You will also garner opportunities to work under Registered Professional Engineers, gaining valuable real life high quality experience that you will be able to apply in your everyday tasks.

Tackle the task of the Engineer in Training Exam now, reap the benefits for your career.…

The Engineer in Training (EIT) exam and certification is the first step in acquiring your Professional Engineer (PE) License.  As a licensed PE, you become a member of a exclusive group of Engineers who are afforded a number of exclusive benefits.  These benefits include, but are not limited to, the ability to stamp and seal Engineering drawings, owning own Engineering Firm with name associated with it, performing individual consulting services to the public, and greater increases in salaries.

Passing this Engineer in Training exam and gaining the certification of an EIT is a major milestone to a long and successful Engineering Career.  If you want to take this step, feel free to use the resources on this site to your benefit, and dominate that exam!…

The Engineer in Training (EIT) exam, also known as the Engineering Intern (EI) exam, and certification is the first step in acquiring your Professional Engineer (PE) License. Once you take and pass the 8 hour exam, you become an Engineer in Training or Engineering Intern. At this point, you begin to acquire acceptable work experience towards your PE license while working under, in most cases, the supervision of a registered Professional Engineer. The experience required to apply for your PE license is typically a minimum of 4 years but differs from state to state and in some cases dependent on the accreditation of the program you graduated from.

Get to know the Engineer in Training exam a little bit more here…